Melbourne-wide benchtop installation & replacementInstall-only • Remove & replace • Supply + installCall 0455 664 458
Bunnings benchtops • Melbourne

Bought a Bunnings benchtop? We can cut, join and install it.

Bunnings has a wide range of laminate and timber benchtops, but fixed-size tops still need skilled site fitting. We install suitable Practa, generic laminate and solid timber benchtops across Melbourne — fitting a Kaboodle kitchen? See our dedicated Kaboodle page.

What's actually in the Bunnings benchtop range.

Bunnings sells benchtops under several different labels, and they don't all install the same way. Kaboodle benchtops are designed as part of a modular Kaboodle kitchen system and are sized to match Kaboodle cabinet runs — if you're fitting one as part of a full Kaboodle kitchen, see our dedicated Kaboodle benchtop installation page, which covers that system specifically. This page covers Bunnings' broader range: Practa laminate benchtops, generic laminate worktops sold by length, and solid timber/hardwood benchtops.

Practa and generic laminate benchtops

Sold as fixed-length laminate panels rather than a matched cabinet system, so fit is entirely dependent on site measurement. These need the same care as any fixed-length laminate: accurate cutting to the actual wall-to-wall dimension (not the packaging length), properly prepared joins, and sealed cut edges around any sink or cooktop opening.

Solid timber and hardwood benchtops

Timber behaves differently from laminate — it moves seasonally, needs oiling or sealing on every cut face (not just the visible edges), and is heavier to handle and support over long spans. We check the specific timber species and finish before committing to cut lengths, and we recommend allowing a small expansion gap at fixed end points rather than a tight scribe.

Before purchasing: tell us which Bunnings range you're looking at — Practa, generic laminate or solid timber — plus your layout. Construction and edge detail differ enough between them that it changes what we can cut, join and expose.

We can remove the old benchtop too.

You do not need to organise one trade for removal and another installer for the new worktop. Standard removal and disposal can be included in the reviewed quote. Specialist stone removal is assessed separately.

Choose your Bunnings benchtop

Before buying, send us the product link and your layout so we can check length, depth, joins and suitability for site cutting — timber and laminate benchtops from the same Bunnings range can need quite different handling.

Browse Bunnings benchtops ↗

Common questions

Bunnings installation, answered.

What's the difference between Practa and generic laminate benchtops?

Practa is Bunnings' own laminate benchtop line with its own decor range; "generic laminate" covers other fixed-length laminate panels sold by the metre. Both are site-cut the same way — the main difference is the decor and edge options available.

Do Bunnings benchtops come pre-cut or need site cutting?

Almost always the latter — Bunnings sells benchtops as fixed-length stock, so they're cut, joined and finished to your kitchen's actual dimensions on site.

Can you install a solid timber benchtop from Bunnings?

Yes, with allowance for seasonal movement and sealed cut faces — see the timber section above. Timber needs a different approach to scribing and finishing than laminate.

Melbourne-wide

Ready to replace or install your benchtop?

Send the scope, dimensions and photos. We review the job before confirming a final price.